Books with author Nate Reynolds

This historic book may have numerous typos and missing text. Purchasers can download a free scanned copy of the original book (without typos) from the publisher. Not indexed. Not illustrated. 1901 Excerpt: ... of steam direct from the boiler. The boiler to be of the locomotive type, having 5 square feet of grate, to be set in a hot chamber with an economizer and alternative chimney and forced draught, on the closed stoke-hold system. The condenser to have 200 square feet of cooling surface. The dimensions of the engines to be somewhat as follow: In addition to the brake, each engine was to be furnished with a fly The advantage of having the engines on separate brakes was suggested to the Author by Mr J. I. Thornycroft, M. Inst. C.E. wheel, to act as a belt or rope-pulley, weighing about 1,200 lbs., carried on a separate shaft with a coupling to the crank-shaft. The firm of Messrs Mather and Piatt, Salford Iron Works, undertook the preparation of the designs and the construction of special engines and boiler to meet in all respects the wishes of the Committee, and spared neither trouble nor expense in carrying out the work. It was entirely owing to the zeal and liberality of this firm that the College was enabled to meet the expense of an undertaking involving so much special work. The design of the engines, shown in Figs. 1 and 2, contains many novelties. These were not adopted without what appeared to the Committee to be sufficient reason, as it was unanimously desired to adhere as far as possible to ordinary types. As regards the cylinders, pistons, and valves, there are three noticeable departures; these were adopted with a view--1. To ensure the completeness and efficiency of the steam-jackets. 2. To diminish the resistance to the passage of steam as much as possible. 3. To keep down the clearance. 4. To obtain an adjustable cut-off from zero at any speed. 1. To obtain completeness in jacketing, both ends (or covers) were jacketed as well as the walls. To en...

This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work.This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work.As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.

This book was originally published prior to 1923, and represents a reproduction of an important historical work, maintaining the same format as the original work. While some publishers have opted to apply OCR (optical character recognition) technology to the process, we believe this leads to sub-optimal results (frequent typographical errors, strange characters and confusing formatting) and does not adequately preserve the historical character of the original artifact. We believe this work is culturally important in its original archival form. While we strive to adequately clean and digitally enhance the original work, there are occasionally instances where imperfections such as blurred or missing pages, poor pictures or errant marks may have been introduced due to either the quality of the original work or the scanning process itself. Despite these occasional imperfections, we have brought it back into print as part of our ongoing global book preservation commitment, providing customers with access to the best possible historical reprints. We appreciate your understanding of these occasional imperfections, and sincerely hope you enjoy seeing the book in a format as close as possible to that intended by the original publisher.

This historic book may have numerous typos and missing text. Purchasers can download a free scanned copy of the original book (without typos) from the publisher. Not indexed. Not illustrated. 1901 Excerpt: ... of steam direct from the boiler. The boiler to be of the locomotive type, having 5 square feet of grate, to be set in a hot chamber with an economizer and alternative chimney and forced draught, on the closed stoke-hold system. The condenser to have 200 square feet of cooling surface. The dimensions of the engines to be somewhat as follow: In addition to the brake, each engine was to be furnished with a fly The advantage of having the engines on separate brakes was suggested to the Author by Mr J. I. Thornycroft, M. Inst. C.E. wheel, to act as a belt or rope-pulley, weighing about 1,200 lbs., carried on a separate shaft with a coupling to the crank-shaft. The firm of Messrs Mather and Piatt, Salford Iron Works, undertook the preparation of the designs and the construction of special engines and boiler to meet in all respects the wishes of the Committee, and spared neither trouble nor expense in carrying out the work. It was entirely owing to the zeal and liberality of this firm that the College was enabled to meet the expense of an undertaking involving so much special work. The design of the engines, shown in Figs. 1 and 2, contains many novelties. These were not adopted without what appeared to the Committee to be sufficient reason, as it was unanimously desired to adhere as far as possible to ordinary types. As regards the cylinders, pistons, and valves, there are three noticeable departures; these were adopted with a view--1. To ensure the completeness and efficiency of the steam-jackets. 2. To diminish the resistance to the passage of steam as much as possible. 3. To keep down the clearance. 4. To obtain an adjustable cut-off from zero at any speed. 1. To obtain completeness in jacketing, both ends (or covers) were jacketed as well as the walls. To en...